Materials, Care and Finish
Get to know the materials and finishes behind our 3D prints, and choose the assembly option that suits you. Check each product listing for its particular material, options and intended use.
Our PLA materials
Our product listings include 3DQF PLA, Elegoo Matte PLA, Deeplee Matte PLA, Overture Matte PLA and Anycubic PLA. Selected designs, such as our Alien Turtle, use glow-in-the-dark PLA. These are materials used across the range, not a promise that every product uses every brand or finish.
PLA is the plastic filament used to print these designs. Matte and glow-in-the-dark describe different finish options, not strength ratings. The material and finish available depend on the design; please ask before ordering if a particular brand or finish matters to you.
Printed texture and colour variation
Small layer lines and slight variations in finish are part of the 3D printing process. A knitted-style design is a printed texture, not knitted fabric.
Colours may vary from the images shown. Lighting and screen settings can change how a colour looks. Proposed wording requiring merchant approval: Filament batches can also vary slightly in shade, so items ordered separately may not be an exact colour match. If matching an existing item is important, please contact us before ordering.
Handling your print
Proposed care guidance requiring merchant approval: Handle gently and support the main body when lifting. Avoid dropping, crushing or pulling thin details. Move articulated parts gently within their natural movement; stop if a joint resists rather than forcing it. A moving design is not a promise that every part can bend.
Proposed care guidance requiring merchant approval: Check the individual listing for age guidance and intended use. Keep loose components and broken pieces away from young children and pets. If a part breaks or a joint feels stuck, stop using it and contact us before attempting a repair.
Cleaning
Proposed care guidance requiring merchant approval: Remove dust with a soft, dry cloth or soft brush. If needed, gently wipe with a lightly damp cloth and allow to dry fully. Avoid soaking, abrasive cleaners, solvents, hot water and dishwashers. Do not scrub delicate details or force a brush into joints.
Storage and heat
Proposed care guidance requiring merchant approval: Store indoors in a cool, dry place, away from direct sunlight, radiators, open flames and hot vehicles. Do not use a microwave or apply heat to reshape a print. Store delicate models so other items cannot press against thin details.
No temperature rating, impact rating, load-bearing capacity or outdoor lifespan is stated by this guide. Please ask about your intended use rather than assuming a print is suitable.
Built by us or build it yourself?
These choices apply only where an assembly option is offered on the product page.
- Built by us: Choose this option for us to assemble the model for you.
- Build it yourself: Choose this option if you want to assemble the model yourself. Our DIY build-your-own kit listings state that super glue is not included and is sold separately.
Proposed assembly guidance requiring merchant approval: Check and identify the parts before starting. Gently check how they fit before applying adhesive; do not force a connection. Ask us for product-specific assembly advice if you are unsure. Follow the adhesive manufacturer's instructions and safety precautions. Tools, instructions and other supplies should only be assumed included when the product listing expressly says so.
Not sure which option to choose?
Contact us before ordering with the product name and your question about material, colour, finish or assembly. We can help clarify the options offered for that design.